- Information
- Resources
- Reviews
Product information
ECO-fuser Glass Kiln - with WIFI controller
The ECO-fuser is designed to fulfil two requirements. The first is to provide a plug-in kiln, with similar internal dimensions as the all-conquering Hobbyfuser, but with an easy load flat bed base.
The second is to provide ULTRAefficient, low cost firing and by using GX insulation this is achieved. The ECO-fuser will fire a standard fusing cycle on as little as 4 units
of electricity without losing the performance features of the Hobbyfuser.
The ECO-fuser is controlled by the KCR32C. The KCR32C is simple to use but has huge capacity if required, with 32 programs, each program having 32 segments. The controller also has features such as KW used display, segment forwarding and all of the usual over temperature and fault protections that you would expect from a Kilncare kiln.
An option is the KCR32CWIFI which connects to any local WIFI and allows the user to enter their KCR32C from anywhere in the world using the Kilncare GATEway. GATEway allows the user to view the kiln temperature, write and send new programs to the controller, keep firing logs including notes etc in their own library amongst many other features.
The ECOFuser carries the same impressive FOUR year guarantee on all parts, including the elements, as the rest of the “”fuser” family.
Please make sure that you plug this kiln into the mains and NOT into an extension lead.
Creative Glass Guild offer FREE delivery to UK mainland addresses (excluding some remote and highland areas). Please allow 4-6 weeks for delivery.
We offer you great discounts when you purchase a kiln from us - this kiln entitles you to 7.5% off glass and materials purchases for a year! (This excludes sale items, books and power tools).
Further Information
- 10% more efficient that the Hobbyfuser due to GX technology with a standard fuse cycle using as little as 4 units of electricity.
- Internal size 420mm x 420mm x 225mm (H)
- External Sizes 800mm (W) x 750mm (D) x 550mm (H)
- 2.5kw single phase fitted with 13 amp plug top.
- 960c maximum temperature
- Quartz tube "infra-red" heating system.
- Stainless Steel chamber and base.
- Lid spring lift assist.
- Flat load bed with no retaining walls to negotiate.
- KCR32C Control with 32 programs, each with 32 segments, WIFI monitoring and control optional through the Kilncare GATEway
- Fast react thermocouple.
- Non ceramic fibre lid section.
- Vent hole in the front with open/close dust proof flap.
- Built and designed by Kilncare in the U.K.
- Optional stand or stand with lockable castors.
- Designed and built by Kilncare in the U.K
- FOUR years guarantee on ALL parts INCLUDING the elements
- We recommend a 300mm clearance all around to allow air circulation and better cooling efficiency
- Comes with a System 96 Starter Pack COE 96
Also available with the following accessories
- Shelf and posts
- Powder coated stand
- Shelf, posts and stand
- Stand and wheels
- Shelf, posts, stand and wheels
Specific Kiln Information
- 240 volt
- Single phase UK 13 amp plug fitted
- External Size 800mm (wide) x 750mm (deep) x 550mm (High)
- Maximum Temperature 960°C
- Weight 83kg
- CE marked, built to CE standards
- 4 Year Parts and Elements Warranty
Call us if you would like any further help with your choice on 0117 9588820.
Delivery can take up to 5 weeks depending on factory workload. Delivery is a palletised kerbside service due to the weight and size. We recommend two fit and reasonably strong people are on site to accept the delivery.
- * * * * *09/11/2022
Treat yourself!
By Sarah WoodwardAfter careful consideration, I took the plunge and bought myself a Hobbyfuser 3 Glass kiln. And why not!
It is absolutely brilliant. The controller is so easy to use, and comes pre programmed with great options. I've slumped in it, done hot firings, even done a pot melt in it (using a split pot melt mould from Creative Glass), and that went really hot! It's a good size and is ideal for a starter kiln.
It is British built, and has been made to a very high standard. Another plus is that is comes with a 3 year guarantee and free delivery. You won't regret choosing this kiln, you really won't. - * * * * *09/11/2022
Outstanding Kiln Choice
By Muna ZuberiBeing a pernickety sort, when I decided to get a kiln I did an awful lot of hemming and hawwing when I did my research. I wanted a kiln that was consistent, a decent size, reliable and cheap to run. The main things I wanted to do were glass painting and fusing ? perhaps a bit of slumping (never tried it before) but the option to give it a go was important. You?d never know if you were a slumping wizard unless you had the tools to give it a go (I?m not, but that?s not important right now). The Hobbyfuser 3 seemed to fit the bill and one of the things that persuaded me was that Creative Glass Guild said that they used a couple in their studio. If they use it ? it?s gotta be good ? right?!
Was it consistent? YES ? no hot spots that I?ve identified (and I?ve been busy ? done about 40 firings thus far) and great results. You can store 9 programmes in the controller so, now I?ve done all my test firings, I just need to pick the right programme and away I go. Would I be a little over confident to say that I know what results I?m going to get before everything?s cooked? Probably but I can almost certainly discount kiln issues as the cause. Human error ? that?s a different matter ? in my case, those are frequent and frustrating but I can?t blame my tools.
Decent size? Indeed ? I can get 9 coasters in or masses of pendants if that?s my menu for the day. If I?m feeling adventurous I can fire a glass painting up to 37cm square (a centimetre smaller than the shelf). There?s plenty of height to indulge in a bit of slumping too (if you?ll pardon the oxymoron).
Reliable? See consistent! Yes ? what can I say ? hasn?t let me down yet and I haven?t even had to speak soft words into it?s kilny ear. I have given it a name though (Big Bertha if you want to know). One of the things I looked for was how expensive it would be to repair if that became a neccessity ? the Hobbyfuser 3 has elements you can switch in and out easily and you can also replace the bricks without cementing. Simples.
Cheap to run? Again, it?s a yes. The newfangled "infra-red" quartz tube heating elements must be quite energy efficient as I haven?t noticed an uplift in our electricity bill at all (well, not to do with the kiln anyway).
Other things I?ve noticed since I?ve become a proud kiln ower:
Top loading rocks ? especially if you are fusing ? you can see exactly what you are doing.
Kiln paper ? treat it kindly and it will last several firings.
Plug in kiln ? can?t emphasise enough how handy this is ? the other half is a restless sort and keeps wanting to rearrange the conservatory (where Big Bertha lives). Moving the kiln is not a problem (the other half however...)
Controller ? wow ? scary to begin with and then quickly becomes laughably easy to understand.
In summation ? if you need a decently sized, reliable and cheap to run kiln, the Hobbyfuser 3 is the bees knees. - * * * * *09/11/2022
Quality kiln
By Luce WoodlandGreat service during ordering, delivery and aftercare, from kilncare and CGG. Pre programmed control unit really did mean I could plug it in and go! I've used it twice a week for the first 2 months I've owned it, it been super reliable and I have utter faith in it. I also have complete faith that when it needs servicing it will be easy to organise. Awesome first kiln!
